Toilet hookup line

toilet hookup line

How do you connect a toilet to the water supply line?

A toilet water supply line needs to be connected to the homes water supply. There should be a shut off valve at this location, but not always. If there is not shut off valve, you will likely need to shut the main water supply off for the house to work on it. Toilet water supply lines require a 3/8 compression fitting at the valve.

Can I use a toilet supply line for a sink?

See the article on Toilet Supply Line Fittings for information on getting the supply line connected correctly. Obtain a flexible toilet water supply line that is close to the length you need. Do not get a supply line for a sink, it will not work on a toilet. One end of a toilet supply line is much larger than a sink line.

What size is a toilet water supply line?

Toilet water supply line come in three styles. Most of the time, you have a 3/8 fitting at the shut off valve and a 7/8 fitting at the toilet tank. Do you have a different Problem?

How do you hook up a toilet to a compression hose?

The valve needs a 3/8-inch compression outlet to fit a standard toilet connection hose. 1 Choose an existing cold water pipe into which you can tie the toilet supply line, and shut off the water to that pipe. Open any faucets connected to the pipe and leave them open while you connect the toilet line to it.

How to install a water connection for a toilet?

How to Install a Water Connection for a Toilet 1. Choose an existing cold water pipe into which you can tie the toilet supply line, and shut off the water to that pipe. 2. Cut into the pipe at a convenient spot close to the new toilet with a pipe cutter. Place a bucket under the pipe to... 3. Solder ...

Where does my toilet water supply line connect to?

Your toilet water supply line connects to your homes water supply and to the toilet tank. Do you have a different Problem? See Plumbing Repair or How to Fix a Toilet for a complete listing of related topics.

How do you hook up a toilet to a compression hose?

The valve needs a 3/8-inch compression outlet to fit a standard toilet connection hose. 1 Choose an existing cold water pipe into which you can tie the toilet supply line, and shut off the water to that pipe. Open any faucets connected to the pipe and leave them open while you connect the toilet line to it.

How do you turn off the water to a toilet tank?

The supply line should terminate with a shut-off valve either soldered to the supply pipe or attached with a compression fitting. The valve needs a 3/8-inch compression outlet to fit a standard toilet connection hose. Choose an existing cold water pipe into which you can tie the toilet supply line, and shut off the water to that pipe.

What does it look like? The toilet supply line supplies cold water to the toilet tank. The supply line is arguably the most important part of a toilet, as without it the toilet would have no access to water to flush, cycle, or refill.

What size pipe does a toilet use?

How do you connect a hose to a plastic toilet?

You dont need pliers or tape to connect the other end of the hose to the toilet; just tighten the plastic toilet connector as much as you can with your fingers. When youre done, turn on the water, let the tank fill completely and look for drips. Tighten the connector a bit more if you see any.

What size compression outlet do I need for a toilet?

The valve needs a 3/8-inch compression outlet to fit a standard toilet connection hose. Choose an existing cold water pipe into which you can tie the toilet supply line, and shut off the water to that pipe.

What size hose do I need for a toilet?

The toilet connector is a standard 7/8 inch in diameter. Get a hose long enough to easily span the distance without coiling over on itself. Before you remove the old hose, you need to empty the toilet tank.

How do you connect a toilet line to a cold water pipe?

Choose an existing cold water pipe into which you can tie the toilet supply line, and shut off the water to that pipe. Open any faucets connected to the pipe and leave them open while you connect the toilet line to it. Cut into the pipe at a convenient spot close to the new toilet with a pipe cutter. Place a bucket under the pipe to catch water.

Related posts: