Hook up pex to sink

hook up pex to sink

How do you install PEX behind a kitchen sink?

Install blocking behind the sink and run 1/2-inch PEX tubing around the blocking and extend it out from the wall about an inch. Hold the tubing to the block with a drop ear bend support, which is a metal plate that you screw to the wood. Push a valve designed for PEX tubing into the end of the stub-out.

How to connect a PEX pipe to a faucet?

How to Connect PEX to a Faucet 1 Cut the PEX Pipe. Using the PEX pipe cutter, cut the two pieces of PEX pipe to the length that you need for them to reach the faucet. 2 Crimp the Fitting. Slide a crimp ring onto both pieces of PEX. ... 3 Connect to the Faucet. ... 4 Check for Leaks. ...

Where is the PEX stub out on a water shut off?

Locate the main water line shutoff valve inside your home and turn it clockwise to shut off the flow of water to the entire house. Locate the PEX stub out. The stub out is usually located along the base of the floor or the back of the wall directly under the sink. The stub out can be identified by the two pieces of PEX pipe that stick out.

How do you crimp a PEX pipe?

Slide on your pex fitting to the end of the pipe Crimp down the ring with the pex ring tool. You want to make sure the tool is at a 90-degree angle to the pex pipe, and you’ll hear a “click” when you’ve successfully crimped the ring.

How to install PEX piping for bathroom sink?

How to Install PEX Piping to a Bathroom Sink. 1 Step 1. Locate the main water line shutoff valve inside your home and turn it clockwise to shut off the flow of water to the entire house. 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items

How to use a PEX tool to connect a faucet?

Here’s the basic process on how to connect pex to a faucet: Select the pex pipe you want to use and cut it to length. Then slide the pex ring over the pipe, and place your fitting into the end of the pipe – securing the ring with the pex tool. The finished pex pipe then attaches to your faucet.

How do you turn off the water in a PEX house?

Locate the main water line shutoff valve inside your home and turn it clockwise to shut off the flow of water to the entire house. Locate the PEX stub out. The stub out is usually located along the base of the floor or the back of the wall directly under the sink.

Can you connect a shut off valve to a PEX pipe?

Connecting Sink Shut-Off Valves to PEX Water Lines. Its easy to connect PEX tubing to fittings as well as to copper and CPVC pipes. When you use it to supply a sink, you have at least two options for connecting the valves. You can transition to copper and install compression valves or you can use valves designed for PEX tubing.

How do you use a crimp ring on PEX?

Slide a crimp ring onto the PEX. Slide your fitting, in this case a 90 degree elbow, into the PEX. Crimp rings should be 1/8 to 1/4 of an inch from the end of the PEX. This recommendation is per SharkBite who makes these crimp rings. It might be different for your PEX system so follow the manufacturer directions.

How to attach PEX fittings?

A very simple look at using a pex pinch clamp. This method is the best DIY way to attach pex fittings. The tool is small its quick and you can remove them. Great products that every DIYer should know about.

How do you replace a PEX pipe with new PEX?

Cut off about 6 inches of PEX at the used end and add a coupling and then add about 8 inches or new PEX. You get virgin pipe and a bit extra slack this way. (why do these plumbing posts always sound like a set up for a lewd joke?)

How do you crimp PEX with Sharkbite?

Crimp rings should be 1/8 to 1/4 of an inch from the end of the PEX. This recommendation is per SharkBite who makes these crimp rings. It might be different for your PEX system so follow the manufacturer directions. Position the PEX crimping tool at 90 degrees over the crimp ring.

Related posts: