Attic fan hook up

attic fan hook up

How do you hook up an attic fan to a thermostat?

Then, run the wiring to your attic fan, strip another 8 inches at that end, and connect the wire to the thermostat. Strip away about 3/4 inch of the insulation and use a wire nut to connect all the white wires. Then, wrap the green wire around the grounding screw inside the thermostat box.

How do you wire a 12 2 wire attic fan?

Use wire nuts to connect the black wire from the 12/2 wire to the black or red wire in the attic fan, the white wire to the white wire in the attic fan and the two ground wires.

How does an attic fan work and how does it work?

When installed on the ceiling of your attic, they circulate the air at the top of your house. The fan takes the hot and humid air that sits in your attic, circulates it, and pushes it out of the house’s upper space. This way, hot, stale air under your roof isn’t sitting over your home.

Should you install an attic fan or an air conditioner?

However, by expelling the hot air, an attic fan brings your attic closer to the outside temperature. Your air conditioner can work on cooling your house rather than working against the air coming from your attic. These fans also have some benefits in the winter.

How do you hook up a ceiling fan to a thermostat?

Start by screwing the thermostat switch to the plywood frame that houses the fan. Place it so it’s facing in the direction of the air that’s being drawn out of the attic by the fan. Remove the cover of the thermostat to expose the black and white wires as well as the green ground screw.

Can a thermostat be connected to an attic fan motor?

When attaching a thermostat directly to an attic fan motor, there will be no second ground wire. Attach the single ground wire from the power supply cable to the grounding terminal inside the thermostat box. Never work on a live electrical circuit.

How to wire an attic fan to a circuit?

How to Wire a Attic Fan 1 Locate an existing circuit close to the fans location. Attic lights, ceiling lights and attic junction boxes are ideal circuits to provide power to your attic fan. 2 Test the wires in the junction box to determine if it contains a continuous circuit. ... 3 Turn off the power to the circuit. ... More items...

How do you adjust the thermostat on an attic fan?

Install the thermostat box cover, and use the screwdriver to set the thermostat so that the fan will kick on when the attic reaches 105 degrees. Turn off the breaker that powers the attic light.

Should you install an attic fan to cool your home?

Then, your AC can cool your house without battling the extra hot air coming down from the attic. Conversely, the attic fan can keep air circulating in the winter, preventing moisture from developing when warm and cold air meets under your roof. Contrary to popular beliefs, attic fans don’t cool your home.

How does an attic fan work and how does it work?

When installed on the ceiling of your attic, they circulate the air at the top of your house. The fan takes the hot and humid air that sits in your attic, circulates it, and pushes it out of the house’s upper space. This way, hot, stale air under your roof isn’t sitting over your home.

Are attic fans bad for your roof?

But attic fans can lead to a leaky roof and loss of cool air if improperly installed, and the constant humming noise can be annoying for some people. Many of the older homes have attic fans because air conditioning really has not been around that long.

What are the different types of attic ventilation fans?

There are different types of attic ventilation fans such as: Whole house attic fans that pull in air from outside through the home’s windows. To make the most of your attic ventilation fan, install good insulation in your attic. Also, air seal all of the cracks and gaps in the space to avoid cold air escaping.

Related posts: