Toilet supply line hook up

toilet supply line hook up

How do you connect a toilet to the water supply line?

A toilet water supply line needs to be connected to the homes water supply. There should be a shut off valve at this location, but not always. If there is not shut off valve, you will likely need to shut the main water supply off for the house to work on it. Toilet water supply lines require a 3/8 compression fitting at the valve.

What size is a toilet water supply line?

Toilet water supply line come in three styles. Most of the time, you have a 3/8 fitting at the shut off valve and a 7/8 fitting at the toilet tank. Do you have a different Problem?

Can I use a toilet supply line for a sink?

See the article on Toilet Supply Line Fittings for information on getting the supply line connected correctly. Obtain a flexible toilet water supply line that is close to the length you need. Do not get a supply line for a sink, it will not work on a toilet. One end of a toilet supply line is much larger than a sink line.

How do you hook up a toilet to a compression hose?

The valve needs a 3/8-inch compression outlet to fit a standard toilet connection hose. 1 Choose an existing cold water pipe into which you can tie the toilet supply line, and shut off the water to that pipe. Open any faucets connected to the pipe and leave them open while you connect the toilet line to it.

Does a toilet need to be connected to the water supply?

A toilet water supply line needs to be connected to the homes water supply. There should be a shut off valve at this location, but not always. If there is not shut off valve, you will likely need to shut the main water supply off for the house to work on it.

How do you hook up a new supply line to a toilet?

You can now hook the new supply line to the toilet if the toilet is already installed, or plug it in and turn on the water. Wait for the pipes to fill and check for leaks. If you have connected the toilet line to the tank, check if the tank fills correctly.

How do you hook up a toilet to a cold water pipe?

Choose an existing cold water pipe into which you can tie the toilet supply line, and shut off the water to that pipe. Open any faucets connected to the pipe and leave them open while you connect the toilet line to it. Cut into the pipe at a convenient spot close to the new toilet with a pipe cutter.

How do you measure a water line for a toilet?

Step 1: Measure the distance between your water supply valve (on the wall or floor beneath the toilet) and the point where the line connects to the toilet tank. Allow an extra inch or two for slack.

Toilet water supply line come in three styles. Most of the time, you have a 3/8 fitting at the shut off valve and a 7/8 fitting at the toilet tank. Do you have a different Problem?

How to fix a leaking toilet water supply line?

How do you connect a hose to a plastic toilet?

You dont need pliers or tape to connect the other end of the hose to the toilet; just tighten the plastic toilet connector as much as you can with your fingers. When youre done, turn on the water, let the tank fill completely and look for drips. Tighten the connector a bit more if you see any.

What size compression outlet do I need for a toilet?

The valve needs a 3/8-inch compression outlet to fit a standard toilet connection hose. Choose an existing cold water pipe into which you can tie the toilet supply line, and shut off the water to that pipe.

How do you connect a water shut off valve to a toilet?

Connect the shut-off valve to the toilet with a standard toilet supply hose that has a 3/8-inch compression fitting on one end and a 1/2 FPT fitting to fit the tank inlet on the other. If your toilet is in a basement or another cold, damp place, water condensation on the tank can drip onto the floor and saturate it.

How do you connect a toilet line to a cold water pipe?

Choose an existing cold water pipe into which you can tie the toilet supply line, and shut off the water to that pipe. Open any faucets connected to the pipe and leave them open while you connect the toilet line to it. Cut into the pipe at a convenient spot close to the new toilet with a pipe cutter. Place a bucket under the pipe to catch water.

Related posts: