Toilet supply line hook up

toilet supply line hook up

How do you connect a toilet to the water supply line?

A toilet water supply line needs to be connected to the homes water supply. There should be a shut off valve at this location, but not always. If there is not shut off valve, you will likely need to shut the main water supply off for the house to work on it. Toilet water supply lines require a 3/8 compression fitting at the valve.

What size is a toilet water supply line?

Toilet water supply line come in three styles. Most of the time, you have a 3/8 fitting at the shut off valve and a 7/8 fitting at the toilet tank. Do you have a different Problem?

Can I use a toilet supply line for a sink?

See the article on Toilet Supply Line Fittings for information on getting the supply line connected correctly. Obtain a flexible toilet water supply line that is close to the length you need. Do not get a supply line for a sink, it will not work on a toilet. One end of a toilet supply line is much larger than a sink line.

How to fix a leaking toilet water supply line?

A flexible toilet water supply line is a little easier to tighten. It is still a good idea to use two wrenches. This is just to make sure that you dont damage anything else. Tighten the fitting that is leaking a quarter turn at a time until the leak stops. Use a dry rag and your finger to check for leaks. Replacing the supply line is pretty easy.

How to install a water connection for a toilet?

How to Install a Water Connection for a Toilet 1. Choose an existing cold water pipe into which you can tie the toilet supply line, and shut off the water to that pipe. 2. Cut into the pipe at a convenient spot close to the new toilet with a pipe cutter. Place a bucket under the pipe to... 3. Solder ...

Where does my toilet water supply line connect to?

Your toilet water supply line connects to your homes water supply and to the toilet tank. Do you have a different Problem? See Plumbing Repair or How to Fix a Toilet for a complete listing of related topics.

How do you hook up a toilet to a compression hose?

The valve needs a 3/8-inch compression outlet to fit a standard toilet connection hose. 1 Choose an existing cold water pipe into which you can tie the toilet supply line, and shut off the water to that pipe. Open any faucets connected to the pipe and leave them open while you connect the toilet line to it.

What type of water supply line do I need for toilets?

For toilets, we recommend the Click Seal toilet water supply line and for faucets we recommend the Click Seal faucet water supply line. 2. Frequently Asked Questions (FAQs): What is the strength of the toilet connector? Is the Click Seal® Connector Lead Free?

Toilet water supply line come in three styles. Most of the time, you have a 3/8 fitting at the shut off valve and a 7/8 fitting at the toilet tank. Do you have a different Problem?

Can you use a brass water supply line for a toilet?

How to fix a leaking toilet line?

You need shut the water off at the shut off valve. Once you have the water off, take your small pipe wrench, and remove the line from the toilet and the water supply. There will a rubber washer in each fitting. Remove the washers and replace them. Reattach the line. Turn the water back on and check for leaks.

Why is my toilet leaking water?

The leak may be from worn treads on the fittings. The tape will help fill in the gap. Replace the toilet water supply line and check for leaks. You may choose to do this at the same time you replace the washers. If you have gone through these steps and still have a leak, you will need to buy a new line.

Is it possible to fix a leaking water supply line?

Since finding a leak on the water supply line and fixing it can be tricky, it’s usually easier to call a professional to handle the job for you – but it is possible to do it on your own too. Keep in mind that repairing a leaking toilet supply line is often about the process of elimination.

Do I need to replace my toilet supply line?

Finding the leak will also be the determining factor in deciding whether you need to replace your toilet supply line or not. All the information and methods in the world will be useless if your supply line is severely damaged.. Have a look where the water is coming from. Is it leaking from the tank itself? Is there maybe a hole in the supply line?

Related posts: