Range cord hook up

range cord hook up

How do I connect a cord to my range?

The cord you use must have the same amperage rating as the range circuit. Locate the removable metal cover plate or shroud on the back panel of the range. This covers the cavity that houses the wiring terminal block of the range. There may be a hole about 1 inch in diameter in or near the cover; this is for the cord to pass through.

How do you connect a 4 prong plug to a range?

Instructions 1 Remove the Wire Connection Cover Plate. ... 2 Alter the Ground Connection, if Necessary. ... 3 Connect a 4-Prong Cord (4-Prong Only) Insert the end of the 4-prong cord through the hole in the back panel of the range. ... More items...

What kind of wire do you use to hook up a range?

If the range has a strap or wire between the ground screw and the neutral terminal, you must remove the strap or wire to separate the ground from the neutral. If the range is new, it should be wired for a 4-prong cord; this follows a National Electrical Code requirement that was initiated in 1996.

How do you wire an electric range to a range body?

Attach the red cord wire to the hot terminal with the red wire. Attach the green cord wire to the ground screw on the range body. Tighten all of the screws firmly. The two hot terminals are interchangeable, and each hot cord wire can connect to either hot terminal. The color coding of the hot terminals is not important.

How do you hook up an electric range to a cord?

The cord has three wires, two outside wires and the other in the center. Connect the center wire on the cord to the center terminal on the range. Then connect the two outside wires to the two outside terminals on the range. The cord will come with a clamp, install it and the job is finished.

Does it matter which wire goes where on a range cord?

It does not matter which of the two black and red wires goes where, but they must be positively identified. Typically with a flat 3-wire range cord the center wire is the ground, and the two outside wires are the power wires.

Do I need a three-wire cord on my range?

Therefore, you must install a three-wire cord on your range. The range will have a block that the cord will connect to with three terminals. Three wire systems connect the neutral to ground.

How do you attach a 3 prong plug to a range?

For a 3-Prong Cord Insert the end of the 3-prong cord through the hole in the back panel of the range and position the cord, so it is flat (horizontal). Loosen or remove the screw on the neutral (center) terminal and attach the center cord wire to the terminal, using the screw.

How do you wire an electric range to a stove?

Attach the black cord wire to the hot terminal with the black wire. Attach the red cord wire to the hot terminal with the red wire. Attach the green cord wire to the ground screw on the range body. Tighten all of the screws firmly. The two hot terminals are interchangeable, and each hot cord wire can connect to either hot terminal.

What size wire do I need to run an electric range?

The electrical circuit that powers an electric range must be of sufficient amperage to supply the necessary power to the range. The power demand of ranges varies depending on the rating of the appliance, but in most cases, a 50-amp 240-volt circuit is required, wired with #6-gauge wire.

Do electric ranges come with a power cord?

Most ranges do not come with the power cord attached; this is a component you will need to buy separately and connect yourself. Unlike the installation of the circuit itself, connecting the power cord is relatively easy work, so most DIYers can do it themselves.

How do you wire an electric range to a 240 volt circuit?

It involves installing a new 240-volt circuit breaker and routing the electrical cable through walls to the location of the range outlet. The electrical circuit that powers an electric range must be of sufficient amperage to supply the necessary power to the range.

Related posts: