How do you hook up an amp to a stock radio

how do you hook up an amp to a stock radio

How do you hook up a radio to an amp?

There are two ways to do this: get a line output converter (LOC) thatll adjust the speaker-level signal for your amps input, or get an amplifier with speaker-level inputs. You cut the factory speaker wires behind the radio, and connect the wires coming from the radio to your LOC or amps inputs.

How to connect an amplifier to a factory stereo?

Check out How to connect an amplifier to a factory stereo to see how this can be done. Neatly drape or trim each wire and connect it to the amp. Make gentle curves with the wires, not sharp bends that could pinch.

How do you hook up a car AMP to a battery?

Connect the amps negative terminal to the cars chassis ground. Use a short negative power wire that is the same diameter as the positive wire that leads to the battery. Insert the main power wire fuse once all the connections for the other wires are in place.

How to wire a stereo amp to a speaker?

Cut the speaker wires, leaving enough length to move the wire and to have enough length to connect to the wire freely. Strip a small part on both the stereo’s speaker wire and your amp speaker wiring.

How do I connect my radio to my amp?

1 Connect speaker outputs to your amp’s speaker level inputs 2 Connect a line-level adapter to the radio then use RCA cables to the amp 3 Connect your radio to the amp using RCA cables directly

Can you plug an outboard power amp into a radio?

Because factory radios don’t have dedicated outputs for amplifiers “RCA” or “preamp outputs”, most outboard power amps come with high-level inputs, which enable you to tap into the factory speaker wires for signal flow.

How do you wire an amp speaker to a car stereo?

Cut the speaker wires, leaving enough length to move the wire and to have enough length to connect to the wire freely. Strip a small part on both the stereo’s speaker wire and your amp speaker wiring. If using a line-level adapter, connect to the stereo’s speaker output side.

How to hook up an amp without RCA jacks?

The third option to hook up an amp without RCA jacks comes in the form of a line output converter. This is a device used by many installers who have customers that don’t want to get rid of any aspect of their factory stereo – they simply want to add amplifiers and subwoofers.

How to connect speaker wire to receiver or amplifier?

In most cases, a home stereo receiver or amplifier allows connecting speaker wire using the binding posts and/or banana plug jacks. How to connect speaker wire to receivers or amplifier with binding posts You can easily connect speaker wire to most amplifiers or receivers pretty easily.

How to connect car speakers to an amp?

How to Connect Speakers to an Amp 1 Method 1 of 3: Hooking up Car Speakers. Install an amp in your vehicle. ... 2 Method 2 of 3: Attaching Speakers in a Series. Wire your speakers in a series if they’re less than 8 ohms. ... 3 Method 3 of 3: Using a Parallel Set-up. Opt for a parallel wiring system if your speakers are more than 8 ohms. ...

What size AMP do I need for my car stereo?

I like to use 50W or higher per channel as a good rule of thumb when buying an amplifier. Home stereo and car speakers normally often use a red or plus sign “+” to indicate the polarity for the speaker wiring terminals which you connect your wiring to.

What are speakers wires?

Speaker wires consist of 2 separate wires, which connect to the positive and negative terminals on your amp. These 2 small and thin wires are surrounded with black insulation. Car speakers and amps rely on negative and positive terminals, or power sources, to produce sound.

Related posts: